Check Video Tutorial Below
So in this project you need a cardboard box, 12 volt LED lights, white sheet, glue & 12 volt adapter.
So first you need to cut the cardboard box front side & make sure you have that front board, because later we can use that to close the cardboard box.
So once you cut down, place white sheet on all sides. I’m using chart paper which is good G S M. Only important thing is you need to place a long white sheet on the front so it covers both the front side & as well as the bottom. Using a long sheet for both side it’s good because while taking pictures it won’t look like two separate pieces.
After placing all white sheets you need to place a l e d lights according to your requirements. I’m using 12 volt 3 l e d lights which I bought from a local store for under 60 rupees which is under 1$. For placing I’m gonna place one on left, one on right & another one is on top. You can use as many leds as you want.
I’m using a 12 volt adapter for connecting these LED lights.
So once you have done this you can place that piece of cardboard box which you cut at the beginning, place it on the front side, so that you can close it when you’re not using it.
Here are the some sample videos & pictures which I took from this cardboard light box.
